Charging at home is cheaper than public charging, more convenient than searching for an available point, and faster than the three-pin plug that came with your vehicle. A dedicated 7kW home charger delivers a full overnight charge for most electric cars, meaning you start every morning with a full battery without planning around it. The three-pin plug works temporarily, but it adds around five miles of range per hour and most manufacturers advise against relying on it permanently because the socket wasn’t designed for sustained high-current draw over extended periods.
We install home EV chargers across Woking, handling the complete process from initial electrical assessment through to charger supply, installation, testing, and commissioning. We work with all major brands and recommend the right unit based on your vehicle, your driving habits, your property’s electrical capacity, and your budget.
Every installation includes a dedicated circuit from the consumer unit with its own protective device, correct earthing arrangements, full testing, and certification to current regulations. Most installations complete within a single day. Woking’s strong commuter base and growing EV adoption make home charging one of the most practical investments you can make. Contact us for a free assessment at your Woking property.
We supply and install all major home EV charger brands across Woking, including Easee, Zappi, Ohme, Pod Point, and Wallbox. Each brand offers different features and we recommend the right unit based on your specific circumstances rather than pushing a single product. The Zappi integrates with solar panels, diverting surplus generation into your car rather than exporting to the grid. The Easee is compact, well-designed, and expandable if you add a second vehicle later. The Ohme offers intelligent scheduling that optimises charging around your energy tariff to minimise costs. We explain the differences, recommend honestly, and supply the unit as part of the installation so everything is covered under one quote with one point of responsibility.
Before any charger goes on the wall, we assess your home’s electrical infrastructure to confirm it can support the additional load safely. A 7kW charger draws approximately 32 amps — a significant addition to your total household demand. We check your consumer unit for spare capacity, assess whether the main fuse and meter tails handle the increased load, verify earthing arrangements, and determine the most efficient cable route from the board to the charger position. If your consumer unit is full, lacks adequate protection, or needs upgrading, we include this in the quote so there are no surprises on installation day. Properties across Woking’s older housing in the town centre and Hook Heath sometimes need board upgrades alongside the charger.
A standard EV charger installation typically takes three to four hours from arrival to a fully commissioned charger ready for use. We install a dedicated circuit from the consumer unit with its own MCB or RCBO protection, run the cable to the charger position using the most discreet route available, mount the unit on the wall or a freestanding post, make all connections, install an earth rod where required, test the complete circuit, and commission the charger. We walk you through the app setup, show you how to schedule charging sessions around off-peak tariffs, and explain how to get the most from your home charging setup. You receive an electrical installation certificate confirming the work meets current standards. Most Woking homeowners are charging their vehicle the same evening.
If your property’s electrical supply doesn’t have the headroom to run a 7kW charger at full power alongside normal household demand, load management provides the solution without an expensive supply upgrade from your energy provider. Most modern smart chargers include built-in load management that monitors household consumption in real time and adjusts the charging rate dynamically — reducing power to the charger when the oven runs or the shower is on, and increasing it again when demand drops. Your car charges as fast as your supply allows at any given moment without ever exceeding total capacity. For most Woking homes on a standard 60A or 100A supply, load management eliminates the need for a costly supply upgrade entirely while ensuring your car is fully charged by morning.
EV charger installation requires more than fixing a box to the wall and plugging it in. The electrical assessment, supply capacity check, earthing arrangements, circuit protection, and cable specification all need to be correct for the installation to be safe, compliant, and reliable through years of daily charging. Shortcuts on any of these elements create problems — from nuisance tripping and failed chargers to installations that don’t pass inspection.
We provide detailed, all-in quotes covering the charger unit, all materials, installation labour, testing, certification, and any additional work needed such as consumer unit upgrades or earthing improvements. One price for the complete job with no hidden extras appearing on installation day.
Every installation is carried out to current BS 7671 standards and certified by a registered electrician. We handle any OZEV grant applications where eligible.
We install EV chargers throughout Woking and the surrounding Surrey area, covering the town centre, Hook Heath, Maybury, Sheerwater, St Johns, Horsell, Knaphill, Goldsworth Park, Byfleet, West Byfleet, Pyrford, Ripley, Send, and surrounding areas.
If your consumer unit is full, lacks RCD protection, or needs upgrading to accommodate the new EV charger circuit, we carry out the board upgrade as part of the same visit. We replace outdated consumer units across Woking with modern boards fitted with MCBs and RCDs or individual RCBOs that detect faults within milliseconds. Combining a board upgrade with an EV charger installation makes practical and financial sense — the electrician is already working at the consumer unit, so both jobs together cost less in total labour than scheduling them separately.
If the charger assessment reveals wider concerns about your installation — outdated cabling, circuits without proper earthing, or wiring that’s deteriorated beyond what a simple upgrade addresses — a full or partial rewire brings the entire system up to current standards. We carry out complete and partial rewires across Woking, replacing dated wiring with modern circuits protected by a new consumer unit. Addressing underlying wiring issues alongside the charger installation ensures your home’s electrics are safe and compliant throughout, not just on the new charger circuit.
Electrical planning is an important part of any renovation or extension project. We work closely with homeowners and builders to ensure electrics are installed safely and positioned correctly.
This includes adding new circuits, upgrading existing systems and ensuring all work complies with current regulations. Early planning helps avoid delays and costly changes later on.
Lighting Installations